> For the complete documentation index, see [llms.txt](https://docs.monogoto.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.monogoto.io/advanced-console/network-management/add-network-nat.md).

# Add Network NAT

Customers can perform NAT port forwarding to the mobile network via a single public IPv4 address, TCP or UDP port.  To assign a Network Address Translation (NAT) to a network, do these steps:

1\.       Click **Network** from the sidebar menu.

2\.       Click the **Edit** icon for a Network displayed in the list.

3\.       Select the **NAT** tab.

4\.       Click **Add New** to display the NAT details.

5\.       Enter a **Sources Address Mask** for the network NAT.

6\.       Select a **Destination Gateway** for the network NAT.

7\.       Select a **Protocol** for the network NAT.

8\.       Select a **Forward to Address**.

9\.       Click **Save & Close** to assign route to network.

![](https://3922449203-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-M0mPxGpottOEfcucXOR%2Fuploads%2FUnjpt1Zg4epJ9AgDKz03%2F8.PNG?alt=media\&token=eab35fe5-61dc-4f03-8be1-2aad5bed1bda)