# Baicells Nova 442i

The [**Baicells Nova 442i**](https://na.baicells.com/product/Details?id=663145e9-0c89-4fdb-9cce-00286d40ab7d) is part of the outdoor series of Baicells. The Nova 442i is an advanced two-carrier outdoor eNodeB (eNB) compliant with 3GPP LTE TDD technology. This 4x4W eNB operates in Carrier Aggregation (CA) mode or Dual Carrier (DC) mode

![](/files/QDomHpTX8HQccLUYBWxD)

### Quick Navigation

* [Getting Started](#getting-started)
* [Nova 442i Configuration](#baicells-neutrino-430-configuration)
* [Useful Links](#useful-links)

### Prerequisites

* Nova 442i
* Monogoto Edge
* Configuration data to connect the eNodeB to Monogoto Edge\
  \&#xNAN;*Reach out to **<support@monogoto.io>** if you haven't received the config data yet*

## Getting Started

{% hint style="warning" %}
The Baicells Nova 442i can be integrated with Monogoto Edge support Local Break Out (LBO)
{% endhint %}

Connect the [**Monogoto Edge**](https://docs.monogoto.io/private-lte/monogoto-edge/edge-nuc) to your internet router using an ethernet cable connected to **Port 1**.

Connect the **power cable** of the Monogoto Edge.

![](/files/8GWn1C1FJXB0ouUVszH4)

Connect an ethernet cable from the [**Monogoto Edge**](https://docs.monogoto.io/private-lte/monogoto-edge/edge-nuc)  **Port 2**, to the **POE port** of the **Nova 442i**.

Connect the GPS antenna, to the **GPS port** of the **Nova 442i**.

Connect your **computer to the Switch** to configure the eNode&#x42;**.**

Connect the **power cable** to the **Nova 442i**.

### Connect your computing to the Baicells Nova 442i&#x20;

* Open the web browser and enter the IP address of the eNodeB, which is most likely: `192.168.150.1`
* Login using the username and password: `admin` / `admin`

{% hint style="warning" %}
Make sure to update your password after the first login.
{% endhint %}

&#x20;**Baicells Nova 442i** **Configuration Guide** \
\&#xNAN;*For detailed documentation about the* Nova 442&#x69;*, review the **Baicells*****&#x20;Configuration Guide**

{% file src="/files/JJSdplouzhQ1o7Z1wzob" %}

## **Baicells Nova 442i** Configuration

#### Set Quick Setting

In the Nova 442i configuration portal, select **Basic Setting->Quick Setting** in the navigation bar.

* **FrequencyBand**: *Specify the LTE band you would like to use*
* **EARFCN**: *Use the address received from Monogoto*
* **CellIDnity**: *Use the address received from Monogoto*
* Set **MME IP Address** to: `Monogoto Edge MME ip`
* Set **TAC** according to the details received by Monogoto.
* Under **PLMNID** set it to: `315010`

<figure><img src="/files/QoTg8qeJx6GcuGHgo5sB" alt=""><figcaption></figcaption></figure>

Select **Save** to save the configuration settings

#### Set **Core Network**&#x20;

In the Nova 442i configuration portal, select **Basic Setting->Core Network** in the navigation bar.

* Set **MME IP Address** to: `Monogoto Edge MME ip`
* Under **PLMNID** set it to: `315010`

Select **Save** to save the configuration settings

![](/files/TxbgwscsKy7lCoq1KvEe)

### **Validate the** connection

Select **Basic setting->Basic Info**.&#x20;

To validate the successful connection, review the **Cell State** and **MME Status**:

* The **Cell State** should report: `Active`
* The **MME Status** should report: `Connected`

![](/files/smYHlFFP2lAA5G8KEzTM)

{% hint style="success" %}
Do you see a successful connection? **Congratulations! Your eNodeB is successfully set up  🎉**
{% endhint %}

## Useful Links

* [Baicells Nova 442i Installation Guide](https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-M0mPxGpottOEfcucXOR%2Fuploads%2FoQIWCUNOWWf8ThEy6aMN%2FBaicells%20Nova442i%20Outdoor%20eNB%20Installation%20Guide.pdf?alt=media\&token=8133998b-8ff1-405d-9568-e21366a05421)
* [Baicells Nova 442i Datasheet](https://files.gitbook.com/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-M0mPxGpottOEfcucXOR%2Fuploads%2F0lBwBnFT9T3sqwrgPyFb%2FNova442i_Datasheet.pdf?alt=media\&token=8232c0b9-bb84-495b-94af-7311cc9b9f3b)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.monogoto.io/private-networks/enodeb/baicells-nova-442i.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.