IPC SCB800 CBRS Camera
Easy to install SCB800 CBRS Camera
The Smawave SBC800 Camera is an LTE device that provides access to (private) LTE networks. It allows users to access the shared spectrum of the CBRS using LTE technology.
The SBC800 Camera supports 5G/4G LTE bands.
Prerequisites
Monogoto SIM
IPC SCB800 Camera
Access to a private LTE network
Connect the IPC SCB800 Camera
Start by inserting the Monogoto SIM into the IPC SCB800 Camera.
Connect the IPC SCB800 Camera to your PC using the Eth port.
Open up a browser and visit the URL: 192.168.1.168.
Enter the user name and password and click Login. The default credentials are: Username: admin Password: admin
Make sure to change the password after your first login.
APN Configuration
Open up the page Remote Setting > 5G >5G APN Config.
Configure the APN to: data.mono
Band Configuration
Open up the page Remote Setting > 5G >5G Scan Mode
Configure the Scan Mode to: Band Lock
B48 (CBRS)
Review the connection status
Visit the Remote Setting > 5G >5G Connection Status page to validate the connection with Monogoto's private network. If the connection was successfully established, the LTE Status reports: Connected. The Operator shows: 315010 iOT
Useful Links
Last updated