Telit LM960A9-P
Connect the LM960 modem to Monogoto's private LTE Network
Last updated
Was this helpful?
Connect the LM960 modem to Monogoto's private LTE Network
Last updated
Was this helpful?
The LM960A9-P mini PCIe (mPCIe) supports LTE Cat 9 for bands 42, 43 and 48. The modem is designed for Europe and North America and is perfectly suited for private LTE networks as it supports band 48, also referred to as CBRS.
Monogoto SIM
Telit LM960A9-P cellular modem
Access to a private LTE network
Connect to the modem, enter the command: AT
and wait for the response: OK
Reset the modem to the factory default configuration:
Set the error reporting to verbose, resulting in more descriptive error messages (optional):
Check if the SIM card is attached and is not locked with a PIN, expected response: +CPIN: READY
:
If you receive an error, the SIM may not be inserted properly or the SIM is protected with a PIN. By default, Monogoto SIMs are not PIN protected.
Request the modem hardware version:
Request the modem firmware version:
Request the IMSI (International Mobile Subscriber Identity):
Request the ICCID (Integrated Circuit Card ID), which is the identification number of the SIM card
Manually set the network:
Monogoto's private LTE network is indicated with the MCCMNC code: 315010
. To connect to the private LTE network, enter:
To test if the network is set correctly enter:
Expected response: +COPS: 0,2,“315010”,7
7
indicates that the modem is using LTE.
Check the radio signal strength and signal quality:
Example response: +CSQ: 22,1
Set the APN to data.mono
:
To test if the APN is set correctly, enter:
Expected response: +CGDCONT: 1,"IP","data.mono","0.0.0.0",0,0,0
Activate the PDP (packet data protocol) context:
Test if the PDP context is activated:
Expected response: +CGACT: 1,1
Example response:
315010
(the fourth value) indicates that the device being connected to Monogoto's Private LTE Network
3
(the second-last value), indicates an active CS & PS service
Example response:
The last value: 48
represents the cellular band the modem is currently using.
Expected response: +CGPADDR: 1,10.XXX.XX.XXX
Do you see an IP address? Congratulations! 🎉 You’ve successfully connected the LM960 modem to Monogoto.
Have a look at the Things logs in the to find more details about the established connection.